| Slide Travel on X axis: |
300mm (11.8") |
| Slide Travel on Y axis: |
220mm + 100mm (8.66" + 3.94") |
| Slide Travel on Z axis: |
250mm (9.84") |
| Heright of Spindle Nose from Table |
200mm~450mm (7.87" ~ 17.7") |
| Table Sizr (W x L): |
510mm x 220mm (20.1" x 8.66") Cross Key Ways |
| Sub-Table Size (W x L): |
510mm x 220mm (20.1" x 8.66") 3 T-Slots |
| Tables Max. Load Capacity: |
100 kg (220 Lbs) |
| Max. Spindle Speed: |
20,000min-1 |
| Rapid Tracers Rate (X,Y,Z-Axis): |
(48x48x36)m/min (1.890"x1.890"x1.1417") |
| Shank of Tool Holders: |
BT30+P30T II |
| Tool Exchange System: |
Magazine Direct System |
| No. of Tool Pot: |
12 |
| Max. Tool Diameter x Tool Length: |
ø50mm x 200mm (ø1.97" x 7.87") |
| Max. Tool Diameter Weight (per 1 Tool): |
2.0kg (Total 15kg) (4.4 Lbs[Total 33 Lbs]) |
| Tool Changing Time (tool to tool) / (chip to chip): |
0.9sec / 2.0sec |
| Machining Accuracy (positioning/Repeated Positioning): |
0.005mm (0.0002") / +-0.003mm (+-0.0001") |
| Max. Height of Machine (NC YS / FANUC): |
2,180mm (85.8") |
| Min. Height of Machine (NC YS / FANUC): |
2,050mm (80.7") |
| Height in Transportation (NC YS / FANUC): |
2,050mm (80.7") |
| Size of Machine (Width, Depth): |
1,200mm x 1,835xx (47.2" x 72.2") |
| Machine Weight: |
1,700 kg (3,740 Lbs) |
| NC Unit: |
YS 830DI |
| Spindle MotorL |
5.5/1.5 kw (7.3/2.0HP) |
| Power Capacity Required: |
8.3KVA |
