|
|
VM5III
Type A |
VM5III
Type B |
VM5III
Type C |
| Travel on X axis (Table: right/left): |
820mm(32.28") |
1,020mm(40.16") |
1,530mm(60.24") |
| Travel on Y axis (Saddle: back/forth): |
510mm (20.08") |
| Travel on Z axis (Spindle head: up/down): |
510mm (20.08") |
| Distance from table top surface to spindle nose: |
150mm(5.91") ~ 660mm(25.98") |
| Distance from column front to spindle center: |
559mm(22.01") |
| Spindle speed: |
No.40:25min-1
~ 8,000min-1, No.50:25min-1
~ 6,000min-1 |
| Spindle nose (nominal number): |
7/24 taper No.40/No.50 |
| Spindle bearing bore diameter: |
No.40:ø70mm(dia
2.76"), No.50:ø85mm(dia 3.35") |
| Type of tool shank (nominal number): |
JIS B 6339 BT40,50 |
| Type of pull stud (nominal number): |
No.40:MAS 403 P40T-1,
No.50:OKK 90º |
| Max. tool diameter (with adjacent tools): |
No.40:ø82mm(dia
3.23"), No.50:ø110mm(dia 4.33") |
| Max. tool diameter (without adjacent tools): |
No.40:ø110mm, No.50:ø200mm |
| Max. tool length (from the gauge line): |
350mm (13.78") |
| Spindle motor (30 min. rating/continuous rating): |
AC 11/7.5kW(15/10HP) |
| Coolant tank capacity: |
280 litres (74.0gal) |
| Machine height (from floor level): |
No.40: 2,775(109.25"),
No.50: 2,846(112.05") |
| Required floor space under operation (left to right X depth): |
2,480mmX2,970mm 97.64" X 116.93" |
2,820mmX2,970mm 111.02" X 116.93" |
3,020mmX2,970mm 118.90" X 116.93" |
| Required floor space including maintenance are (left to right X depth): |
2,645mm(104.13") X 3,780mm(148.82") |
| Machine Weight: |
No.40:7,000kg(15,400lbs)
No.50:7,500kg(16,500lbs) |
