| Travel on X axis (Table: right/left): |
1530mm (60.24") |
| Travel on Y axis (Saddle:
back/forth): |
740mm (29.13") |
| Travel on Z axis (Spindle head:
up/down): |
660mm (25.98") |
| Distance from table top surface to
spindle nose: |
150mm(5.91") ~
810mm(31.89") |
| Distance from column front to spindle
center: |
780mm(30.71") |
| Spindle speed: |
25min-1
~ 6,000min-1 |
| Spindle nose (nominal number): |
7/24 taper No.50
(No.40 opt.) |
| Spindle bearing bore diameter: |
ø85mm(dia 3.35") |
| Type of tool shank (nominal number): |
JIS B 6339 BT50 |
| Type of pull stud (nominal number): |
OKK only 90º |
| Max. tool diameter (with adjacent
tools): |
ø110mm(dia 4.33") |
| Max. tool diameter (without adjacent
tools): |
ø200mm(dia 7.87") |
| Max. tool length (from the gauge
line): |
350mm (13.78") |
| Spindle motor (30 min.
rating/continuous rating): |
AC11/7.5kW[OP 15/11] AC15/10HP[OP 20/15HP] |
| Coolant tank capacity: |
360 litres (95.1gal) |
| Machine height (from floor level): |
Mitsubishi:
3,150mm(124.02"), Fanuc: 3,230mm(127.17") |
| Required floor space under operation (left to right X depth): |
3,980mm(156.69") X
3,860mm(151.97") |
| Required floor space including
maintenance are (left to right X depth): |
4,980mm(196.06") X
4,630mm(182.28") |
| Machine Weight: |
10,500kg (23,100lbs) |
